To learn a little more about our products, click on the list of materials and it 
will give you a detailed explanation.
If you have any questions  please feel free to
contact us.

Alabastrite

Our product line name for poly resin items. Cold cast. Clean by dusting; do not wash with water. Alabastrite is a stone based material that can be intricately molded and will allow paint to adhere.

Back to Top

Bone China

White clay with bone ash added. Bone ash content must be at least 25% by U.S. guidelines. Fired at 1800 degrees. The translucent material is finished with a glaze or under glaze (matte). Lighter, stronger, more expensive than porcelain.

Back to Top

Porcelain

Fine ground white clay, molded and fired in an oven for eight hours at 1200 degrees. Finished with a glazed, under glazed, or "bisque" finish. Glazing produces a high gloss; under glaze produces a matte finish. Bisque is a matte finish without glaze. After finishing, the item is "cooked" for six hours at 800 degrees.

Back to Top

Jade Porcelain

Jade porcelain is a type of porcelain made with a finer clay. Usually no glaze or only a colorless glaze will be applied at the final firing to show off the very smooth surface and to preserve the translucency. Jade Porcelain is used for night lights because of its high degree of translucency when lit.

Back to Top

Stoneware

White clay with fine ground stone. Working with stoneware demands great expertise, and is in fact becoming a lost art. Stoneware is safe to use in microwave and conventional ovens.

Back to Top

Patchwork Porcelain

European designer fabric is stretched over porcelain figurines, then coated with twelve layers of lacquer. Each application of lacquer is hand polished, for a rich shine and an ultra smooth finished texture. The texture of the fabrics can only be seen in the final pieces, not felt, because of the twelve layers of lacquer covering them.

Back to Top

Cubic Zirconia

The most successful simulated diamond. Properties such as refraction, hardness, and specific gravity are remarkably similar to diamonds. Cubic zirconia are very hard to distinguish from diamonds; sometimes a jewelers loop will be needed to see the difference. TCZW - total cubic zirconia weight. Cubic zirconias are of 1st quality.

Back to Top

Diamond

Extremely hard, highly refractive colorless or white crystalline of carbon. Diamonds, like all gemstones, are judged in terms of Carats, or weight (different from Karats, as in gold purity). TDW - total diamond weight (100 points per carat) Diamonds of 5 points or more are "I" quality, full 58-facet cut diamonds. Diamonds that are less than 5 points are of matching quality.

Back to Top

Gold

The ultimate precious metal. Virtually indestructible, amazingly malleable, doesn't rust or tarnish. Graded by purity; in the U.S. a scale of 24 is used, so 24 Karats (24K) is 100% pure. 18K is 18 parts gold and 6 parts alloy (other metals), and so on. 10K is the legal minimum for Karat graded gold. The word "Plumb" indicates the exact purity of the piece. Our gold items are either 10K plumb or 14K plumb.

Back to Top

Gemstones

Rubies, sapphires, emeralds, amethysts, often treasured as birthstones. Gemstones are priced and graded by Carat weight.

Back to Top

Pearl

Smooth, lustrous, variously colored round gemstone originally formed as a deposit around a grain of sand in the shells of certain shellfish. Pearls may be formed naturally or "Cultured" through an artificial implanting process.

Back to Top

Sterling Silver

To qualify as "sterling" a given piece must be composed of a least 92.5% pure silver. Our sterling silver items are 925.

Back to Top

 Hong Tze

To closely emulate a special stone found in China which is known for its deep red color, these items are created using an alabastrite polyresin. Hong Tze pieces are highly polished, further bringing out the intense, deep red color.

Back to Top

Frosted Acrylic
Acrylic items are given the French Lilac process, (used on glass), to achieve the distinctive frosted look. Example: 27205. The drama of frosted glass without the weight.

Back to Top

Dolomite
A magnesia-rich, sedimentary rock resembling limestone, dolomite is either gray, pink or white in color.

Back to Top

Gypsum
Gypsum is a white mineral which is usually used to make Plaster of Paris.

Back to Top

Automatic Watches

Self winding. Weighted rotor works on gravity, and natural wrist movements keep the watch wound.

Back to Top

Mechanical Watches
Requires winding by hand. Spring driven.

Back to Top

Quartz Analog Watches

A battery activated quartz crystal vibrates 32,768 times per second, providing the energy to move the hands. Usually accurate within one minute a year.

Back to Top

Quartz Digital Watches

Digital display instead of moving hands. Often features additional functions such as day/date, stop-watch, alarm, and others.

Back to Top

How to Change Watch Batteries

To change watch batteries locate the groove on the back of the watch case and gently pry off the back. Remove the old battery by loosening the screw that holds the metal contact, slide the battery out, and insert the new battery same side up as the old. Tighten the screw, and snap the case back on.

Back to Top